RCU Forums
F8F Bear cat cowl shown here is 7 1/2" long and 9 3/4" in diameter.
F8F Bear cat cowl shown here is 7 1/2" long and 9 3/4" in diameter.
0 2019/09/13 12:27:05
Small cowl for the zero!
Small cowl for the zero!
0 2019/09/13 12:29:44
New, never installed retracts for DV8R trainer jet with air kit but no wheels. Let me know if you can use them.
New, never installed retracts for DV8R trainer jet with air kit but no wheels. Let me know if you can use them.
0 2019/09/25 13:14:55
You will only need to use this puller one time to know how handy it is to have in your work shop for pulling servo wires through a wing!
You will only need to use this puller one time to know how handy it is to have in your work shop for pulling servo wires through a wing!
0 2019/09/27 07:52:50
Cowl for the F*F Bearcat that may fit your model.
Cowl for the F*F Bearcat that may fit your model.
0 2019/09/27 07:59:55
New cowl for smaller Zero model, see if you will fit your plane.
New cowl for smaller Zero model, see if you will fit your plane.
0 2019/09/27 08:00:42
Take a look and see if one or more of these CNC scale struts will fit your plane.
Take a look and see if one or more of these CNC scale struts will fit your plane.
0 2019/09/27 08:19:06
Print on Avery Label stock to stick like mad to any servo pug as long as you clean them off first. EZ hookup at the flying field too!
Print on Avery Label stock to stick like mad to any servo pug as long as you clean them off first. EZ hookup at the flying field too!
0 2019/09/27 08:34:21
Custom made for DV8R Jet Trainer produced by Troy Built Models. Never installed or use. Let me know if you can use them!
Custom made for DV8R Jet Trainer produced by Troy Built Models. Never installed or use. Let me know if you can use them!
0 2019/10/04 12:45:07
Now hook up at the flying field or finding the right servo to test is made EZ since the are marked and color matched for each servo you are using.
Now hook up at the flying field or finding the right servo to test is made EZ since the are marked and color matched for each servo you are using.
0 2019/10/04 12:53:21
Hook up faster and get the right plug for the right servo the first time! EZ to read and see the color match. Can be custom marked too!
Hook up faster and get the right plug for the right servo the first time! EZ to read and see the color match. Can be custom marked too!
0 2019/10/04 12:58:56
The long clear tip on the "Thread Locker" allows you to get into hard to reach places and see how much is getting read to come out. Air tight screw on lid, no drying of liquid!
The long clear tip on the "Thread Locker" allows you to get into hard to reach places and see how much is getting read to come out. Air tight screw on lid, no drying of liquid!
0 2019/10/05 11:45:49
Here is the best way to drill hole for your prop and in the right position for compression on a two blade prop! Only one for sale!
Here is the best way to drill hole for your prop and in the right position for compression on a two blade prop! Only one for sale!
0 2019/10/05 12:02:39
Used but not abused and in great working order. It will fill all you needs for 1 transmitter for all your planes! Great Price too!
Used but not abused and in great working order. It will fill all you needs for 1 transmitter for all your planes! Great Price too!
0 2019/10/10 14:54:34
The prop chart is print with information on both sides for Glow & Gas engine as well as thread sizes to help you with spinner adapter nuts.
The prop chart is print with information on both sides for Glow & Gas engine as well as thread sizes to help you with spinner adapter nuts.
0 2019/10/11 09:46:22
When folded, it is the same small size as a credit card and easy to carry at the flying field or hobby shop when you need it most. Have it laminated to last longer.
When folded, it is the same small size as a credit card and easy to carry at the flying field or hobby shop when you need it most. Have it laminated to last longer.
0 2019/10/11 09:47:36
Sticky back white Velcro for attaching you receivers, batteries or tanks. Make sure to seal the wood with a coating of 5 minute glue to cure before sticking in place.
Sticky back white Velcro for attaching you receivers, batteries or tanks. Make sure to seal the wood with a coating of 5 minute glue to cure before sticking in place.
0 2019/10/11 09:55:34
You get 3 25" long drill bits for the cost of one 18" jobber bit at a big box store. You will use these over and over again. Send for a set!
You get 3 25" long drill bits for the cost of one 18" jobber bit at a big box store. You will use these over and over again. Send for a set!
0 2019/10/11 10:04:36
You get enough labels for 6 planes on every sheet. They stick like mad till you decide to peel them off. Works for any radio System!
You get enough labels for 6 planes on every sheet. They stick like mad till you decide to peel them off. Works for any radio System!
0 2019/10/18 12:54:38
This transmitter is in great working order and has not broken switch handles or dents. Good buy and is shipped for free.
This transmitter is in great working order and has not broken switch handles or dents. Good buy and is shipped for free.
0 2019/10/18 13:05:00
Get 3-25" long drill bits for the price of just one 18" long bit at the "Big Box" stores. You will use these over and over again.
Get 3-25" long drill bits for the price of just one 18" long bit at the "Big Box" stores. You will use these over and over again.
0 2019/10/18 13:13:13
NIP great set of gear for a Warbird with different links of scale struts to select from when you order a set. Great Price to!
NIP great set of gear for a Warbird with different links of scale struts to select from when you order a set. Great Price to!
0 2019/10/18 13:18:34
great set of scale retracts from ESM with everything you need for installation a great low price.
great set of scale retracts from ESM with everything you need for installation a great low price.
0 2019/10/18 13:20:21
You can select from the scale struts you see.
You can select from the scale struts you see.
0 2019/10/18 13:21:33
Second set of struts you can select from if you order retract set.
Second set of struts you can select from if you order retract set.
0 2019/10/18 13:24:32
Long lasting fiberglass extensions with brass fittings.
Long lasting fiberglass extensions with brass fittings.
0 2019/10/18 13:29:52
These 1 foot long rod are made of fiber glass and have brass fittings. This tool will last you a lifetime. Comes with storage case!
These 1 foot long rod are made of fiber glass and have brass fittings. This tool will last you a lifetime. Comes with storage case!
0 2019/10/25 11:39:50
complete with custom struts to fit your plane. Let me know whick plane and how long the struts need to be from bottom of wing to center of Axle!
complete with custom struts to fit your plane. Let me know whick plane and how long the struts need to be from bottom of wing to center of Axle!
0 2019/10/25 11:47:40
I have several scale struts to match you plane and a complete air kit to go with the retracts.
I have several scale struts to match you plane and a complete air kit to go with the retracts.
0 2019/10/25 11:50:22
Idea for drill holes in wings or fuse where you could never reach before that are 15" long and just the right size modelers will use!
Idea for drill holes in wings or fuse where you could never reach before that are 15" long and just the right size modelers will use!
0 2019/10/25 11:57:09
these Avery labels can be further custom fit by marking them with a small tip sharpie pin!
these Avery labels can be further custom fit by marking them with a small tip sharpie pin!
0 2019/10/25 12:02:57
Here the arms are mounted on a rear Walbro Carb and you can see the difference in length of each arm so to pass over with not touching!
Here the arms are mounted on a rear Walbro Carb and you can see the difference in length of each arm so to pass over with not touching!
0 2019/11/01 12:49:47
CNC arms are made of Aircraft grade aluminum so you can drill and/or tap the holes for a ball joint of regular nylon clevis.
CNC arms are made of Aircraft grade aluminum so you can drill and/or tap the holes for a ball joint of regular nylon clevis.
0 2019/11/01 12:50:57
Here is a shot from the rear of the engine showing the throttle and choke arms installed, they just slide on, no drilling needed!
Here is a shot from the rear of the engine showing the throttle and choke arms installed, they just slide on, no drilling needed!
0 2019/11/01 12:52:24
Like new with very little run time, a YS 120 4 cycle with lots of power for your plane with EZ starting too.
Like new with very little run time, a YS 120 4 cycle with lots of power for your plane with EZ starting too.
0 2019/11/01 13:01:33
You can see here how clean this engine is with no fuel stains or baked on fuel.
You can see here how clean this engine is with no fuel stains or baked on fuel.
0 2019/11/01 13:02:39
I will include some FREE props with this engine, what size do you need? Nylon or Wood?
I will include some FREE props with this engine, what size do you need? Nylon or Wood?
0 2019/11/01 13:03:46
Use this picture to order the struts you need or call me for more information cell 941-345-3243, Uncle George
Use this picture to order the struts you need or call me for more information cell 941-345-3243, Uncle George
0 2019/11/01 13:11:52
Here the two arms are installed on a rear mounted Walbro carb so you can see the difference in height!
Here the two arms are installed on a rear mounted Walbro carb so you can see the difference in height!
0 2019/11/08 11:11:03
Here is a shot from the rear of the carb looking forwar to see the arms in place.
Here is a shot from the rear of the carb looking forwar to see the arms in place.
0 2019/11/08 11:12:17
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.