RCU Forums
0 2022/02/21 15:08:55
Gotta have the bucket...
Gotta have the bucket...
0 2022/02/21 15:08:58
Removed the external gas tank and donated it to my SU-122 project. Installed an empty fuel tank holder.
Removed the external gas tank and donated it to my SU-122 project. Installed an empty fuel tank holder.
0 2022/02/21 15:09:01
Added some extra texture with Mr. Surfacer and some Tamiya texture paint.
Added some extra texture with Mr. Surfacer and some Tamiya texture paint.
0 2022/02/21 15:09:06
0 2022/02/21 15:09:11
Ready for primer. I did remove the tracks and the outer road wheel rubber before priming.
Ready for primer. I did remove the tracks and the outer road wheel rubber before priming.
0 2022/02/21 15:09:16
Just a tad bit of wear and tear.
Just a tad bit of wear and tear.
0 2022/02/21 15:09:21
Some of the weld beads done. Still many more to do. Mocked up the tow cables using the cables from my IS2. They are just the right length to hit all of the holders. Added the post to support the driver's hatch.
Some of the weld beads done. Still many more to do. Mocked up the tow cables using the cables from my IS2. They are just the right length to hit all of the holders. Added the post to support the driver's hatch.
0 2022/03/01 04:05:45
Added the track jacks and holders. Started mocking up the fake hinges for the bins which run the length of the lower hull. The rear two bins on each side contain a collapsible auxiliary fuel bladder. Still need to add more weld beads and the machine gun barrels. Still need to create a fender support and mock up the fuel hoses going into the side fuel tanks. I actually filled all the holes on the rear deck and repositioned all the deck bolts according to pics/video of the real IS-7.
Added the track jacks and holders. Started mocking up the fake hinges for the bins which run the length of the lower hull. The rear two bins on each side contain a collapsible auxiliary fuel bladder. Still need to add more weld beads and the machine gun barrels. Still need to create a fender support and mock up the fuel hoses going into the side fuel tanks. I actually filled all the holes on the rear deck and repositioned all the deck bolts according to pics/video of the real IS-7.
0 2022/03/01 04:05:50
Got the functional barrel travel lock mounted. Had to fabricate the mount as I wasn't fond of eye bolts supplied. I used them on the front of the tank for the cable mounts instead. Fabricated handles on the rear engine hatch and got the external fuel barrels mounted. I also scored the side of the hull to represent the side storage boxes which still need detailed.
Got the functional barrel travel lock mounted. Had to fabricate the mount as I wasn't fond of eye bolts supplied. I used them on the front of the tank for the cable mounts instead. Fabricated handles on the rear engine hatch and got the external fuel barrels mounted. I also scored the side of the hull to represent the side storage boxes which still need detailed.
0 2022/03/01 04:05:54
I also added some cross supports to the larger engine deck grills.
I also added some cross supports to the larger engine deck grills.
0 2022/03/01 04:05:58
0 2022/03/12 02:38:47
0 2022/03/12 02:41:32
0 2022/03/12 02:41:36
0 2022/03/20 15:52:22
0 2022/04/14 17:33:48
0 2022/04/14 17:33:50
0 2022/04/14 17:33:52
0 2022/04/14 17:33:53
0 2022/04/14 17:33:55
0 2022/04/14 17:33:56
0 2022/04/14 17:33:58
0 2022/04/17 14:29:59
0 2022/04/17 14:30:03
0 2022/04/17 14:30:08
0 2022/04/17 14:30:12
0 2022/04/17 14:30:15
0 2022/04/17 14:30:18
0 2022/04/17 14:30:20
0 2022/04/17 14:30:24
0 2022/04/17 14:36:34
0 2022/04/17 14:36:37
0 2022/04/17 14:41:16
0 2022/04/17 14:41:20
0 2022/04/17 14:41:24
0 2022/04/17 14:41:28
0 2022/04/17 14:47:49
0 2022/04/17 14:47:51
0 2022/04/17 14:47:55
0 2022/04/17 14:47:59
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.