RCU Forums
PSP cap for the can it's laying on in picture.
PSP cap for the can it's laying on in picture.
0 2019/05/01 04:51:01
This is called the Flight Assistant, built by me in 2,000 from AMA plan # 520, it has been in Va., Md, Pa, Ohio W.Va. and South Carolina. I still have the plans because I didn't use them as intended. You were supposed to tack glue them to the wood, then cut out the pieces, I used a couple of squares and simply drew the lines on the wood and then cut them out on a 10" table saw. I have been seriously thinking about building another.
This is called the Flight Assistant, built by me in 2,000 from AMA plan # 520, it has been in Va., Md, Pa, Ohio W.Va. and South Carolina. I still have the plans because I didn't use them as intended. You were supposed to tack glue them to the wood, then cut out the pieces, I used a couple of squares and simply drew the lines on the wood and then cut them out on a 10" table saw. I have been seriously thinking about building another.
0 2019/05/01 07:17:13
Except for the wheels it looked like this at first, even down to the ACE Micro-Pro which I still have
Except for the wheels it looked like this at first, even down to the ACE Micro-Pro which I still have
0 2019/05/01 07:31:47
Two or three possibilities by configuring it differently, for example with and without the 90 degree adapter.
Two or three possibilities by configuring it differently, for example with and without the 90 degree adapter.
0 2019/05/21 04:07:47
0 2019/05/21 05:04:32
0 2019/05/24 04:47:09
Elongated rod lower end.
Elongated rod lower end.
0 2019/05/25 03:40:54
Liner unmarked
Liner unmarked
0 2019/05/25 03:43:32
Bearings rusted solid.
Bearings rusted solid.
0 2019/05/25 03:46:14
The point where the rod hit the crankcase and made this gouge is all but invisible.
The point where the rod hit the crankcase and made this gouge is all but invisible.
0 2019/05/25 04:07:52
Saito 180 ready to run, the 16 x 8 three blade should turn 8,000 or better.
Saito 180 ready to run, the 16 x 8 three blade should turn 8,000 or better.
0 2019/05/28 05:21:33
0 2019/05/28 17:27:41
0 2019/05/31 03:04:38
0 2019/06/01 06:20:13
0 2019/06/01 06:26:27
Graupner 10 x 5
Graupner 10 x 5
0 2019/06/02 13:58:54
Graupner 10 x 5
Graupner 10 x 5
0 2019/06/02 13:59:31
Graupner G-Sonic 10 x 6
Graupner G-Sonic 10 x 6
0 2019/06/02 14:01:21
Stock muffler sans the elbow.
Stock muffler sans the elbow.
0 2019/06/03 02:56:23
With short black straight pipe.
With short black straight pipe.
0 2019/06/03 02:58:25
With TurboHeader and Gary made elbow.
With TurboHeader and Gary made elbow.
0 2019/06/03 03:01:05
0 2019/06/04 03:36:55
0 2019/06/04 04:01:19
Saito 56 ruined rod.
Saito 56 ruined rod.
0 2019/06/04 07:46:57
0 2019/06/04 07:48:34
0 2019/06/05 04:51:19
0 2019/06/05 05:59:19
0 2019/06/07 17:38:47
At 30 minutes, nice and clean
At 30 minutes, nice and clean
0 2019/06/08 08:36:10
Idle at 40 minutes 1,870 rpm.
Idle at 40 minutes 1,870 rpm.
0 2019/06/08 08:39:23
Max rpm at 50 minutes run time, 9,860 rpm
Max rpm at 50 minutes run time, 9,860 rpm
0 2019/06/08 08:42:30
0 2019/06/10 09:52:55
Air pump works well
Air pump works well
0 2019/06/10 09:54:26
Max rpm
Max rpm
0 2019/06/10 09:56:25
Saito 90-T idle 3 minutes without dropping a plug.
Saito 90-T idle 3 minutes without dropping a plug.
0 2019/06/10 10:00:39
Saito 182 rebuild
Saito 182 rebuild
0 2019/06/10 15:36:46
0 2019/06/11 04:10:44
0 2019/06/11 10:12:11
0 2019/06/11 10:14:32
Idle with Xoar 14 x 6
Idle with Xoar 14 x 6
0 2019/06/11 10:15:56
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.