RCU Forums
0 2019/09/12 04:41:14
0 2019/09/12 07:05:07
0 2019/09/12 07:07:10
0 2019/09/12 07:15:45
0 2019/09/12 07:16:56
0 2019/09/13 15:35:20
Saito 220 with Iron Bay regulator. John at Iron Bay wasn't sure that the regulator would flow enough fuel for the 220 but it can and did. It also worked well on the little 30.
Saito 220 with Iron Bay regulator. John at Iron Bay wasn't sure that the regulator would flow enough fuel for the 220 but it can and did. It also worked well on the little 30.
0 2019/09/15 05:16:29
0 2019/09/24 03:50:30
The pump actuator rod will eventually wear a groove into the cam, at least thus one did.
The pump actuator rod will eventually wear a groove into the cam, at least thus one did.
0 2019/09/24 03:58:21
If it turns out to be 7 mm, I have the set.
If it turns out to be 7 mm, I have the set.
0 2019/09/24 05:23:09
Early Saito 50 with A on the right lug
Early Saito 50 with A on the right lug
0 2019/09/27 11:53:55
Rock steady and smooth, I did not move it from where Captain Crunch had it.
Rock steady and smooth, I did not move it from where Captain Crunch had it.
0 2019/09/27 11:55:45
Speaks for itself
Speaks for itself
0 2019/09/27 11:57:44
RPM with Bolly Clubman 11.5 x 6 Made in Australia.
RPM with Bolly Clubman 11.5 x 6 Made in Australia.
0 2019/09/30 03:58:37
0 2019/09/30 04:04:47
0 2019/09/30 04:09:56
0 2019/10/02 04:50:10
The pile behind the trailer is twice that high now.
The pile behind the trailer is twice that high now.
0 2019/10/02 04:52:02
My reward
My reward
0 2019/10/02 04:53:41
This 82-B was passed on to me the Crunch, a comparo with my rebuilt one will be interesting, for a few minutes anyway.
This 82-B was passed on to me the Crunch, a comparo with my rebuilt one will be interesting, for a few minutes anyway.
0 2019/10/02 05:51:16
0 2019/10/02 09:05:40
FLYIN' KING SPECIFICATIONS Wingspan: 80.5 inches Wing Area: 1280 square inches Length: 60 inches Weight: 9.5 to 10 pounds Engines: .60 - .75 2-stroke or .70 - .91 4-stroke or
FLYIN' KING SPECIFICATIONS Wingspan: 80.5 inches Wing Area: 1280 square inches Length: 60 inches Weight: 9.5 to 10 pounds Engines: .60 - .75 2-stroke or .70 - .91 4-stroke or
0 2019/10/03 16:56:14
0 2019/10/04 03:40:03
0 2019/10/05 05:27:44
0 2019/10/05 05:28:55
Judging by this pictures on Macgregor's site it is a factory replacement ring.
Judging by this pictures on Macgregor's site it is a factory replacement ring.
0 2019/10/05 05:46:58
0 2019/10/05 05:58:47
0 2019/10/05 06:00:16
Super Tigre 4500 and LA .10
Super Tigre 4500 and LA .10
0 2019/10/07 03:57:41
This is the best thing of all, it usually gets them loose overnight and if a couple of drops are applied at storage time the barrel will never get stuck.
This is the best thing of all, it usually gets them loose overnight and if a couple of drops are applied at storage time the barrel will never get stuck.
0 2019/10/10 04:11:26
0 2019/10/10 04:44:47
Uh Oh, not such an easy fix
Uh Oh, not such an easy fix
0 2019/10/10 05:50:26
0 2019/10/10 06:03:49
I took somebodies advice and resisted the temptation to paint the cylinders black
I took somebodies advice and resisted the temptation to paint the cylinders black
0 2019/10/11 04:07:08
0 2019/10/11 04:10:15
All those big Saito V twins.
All those big Saito V twins.
0 2019/10/11 05:04:01
I love it here, no cows and no trees.
I love it here, no cows and no trees.
0 2019/10/11 06:05:04
0 2019/10/11 13:15:51
82 ring in my new 82 cylinder, the new ring's gap is exactly the same.
82 ring in my new 82 cylinder, the new ring's gap is exactly the same.
0 2019/10/14 05:57:05
Parts I'm sending on the right, two barely used rocker arms, three 56 piston rings, one 56 piston/three rings, five cam followers, should be two that are acceptable, one 82 ring, it's perfectly smooth, good tension. I'll look for a 50 cam. The larger piston on the left is smaller than the 82 piston and larger than the 56 piston. Two new rocker arm pins. If used stuff is acceptable. No funds needed.
Parts I'm sending on the right, two barely used rocker arms, three 56 piston rings, one 56 piston/three rings, five cam followers, should be two that are acceptable, one 82 ring, it's perfectly smooth, good tension. I'll look for a 50 cam. The larger piston on the left is smaller than the 82 piston and larger than the 56 piston. Two new rocker arm pins. If used stuff is acceptable. No funds needed.
0 2019/10/14 06:00:37
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.