RCU Forums
Intake pipe angled outward like exhaust.
Intake pipe angled outward like exhaust.
0 2018/07/22 16:38:24
My saw.
My saw.
0 2018/07/23 02:57:27
OS .62v
OS .62v
0 2018/07/23 03:00:56
Strunk Speed Demon direct drive
Strunk Speed Demon direct drive
0 2018/07/23 06:33:09
Strunk Custom Pro with reduction gear.
Strunk Custom Pro with reduction gear.
0 2018/07/23 06:33:51
I did a couple of things to the new 1.20 DP, I removed the choke and replaced the m3 x 8mm back plate bolts with m3 x 10 mm bolts. I made a blind tap and extended the threads. the holes were plenty deep. The 8mm bolts did not have much engagement, especially where the carb mount bracket bolted in the top back plate bolts. The black O-ring replaced the choke slide and compresses by about 1/16". Note unusual top end of the intake tube. It is a cast aluminum tube.
I did a couple of things to the new 1.20 DP, I removed the choke and replaced the m3 x 8mm back plate bolts with m3 x 10 mm bolts. I made a blind tap and extended the threads. the holes were plenty deep. The 8mm bolts did not have much engagement, especially where the carb mount bracket bolted in the top back plate bolts. The black O-ring replaced the choke slide and compresses by about 1/16". Note unusual top end of the intake tube. It is a cast aluminum tube.
0 2018/07/23 10:42:55
J-Tec in cowl muffler on Saito 1.20 S DP.
J-Tec in cowl muffler on Saito 1.20 S DP.
0 2018/07/25 02:24:37
Add to that crude and leaky
Add to that crude and leaky
0 2018/07/25 03:12:36
SuperTigre 3000 with Bowman ring, the ring not quite broken in. I sold this one.
SuperTigre 3000 with Bowman ring, the ring not quite broken in. I sold this one.
0 2018/07/26 03:10:59
Lookin good
Lookin good
0 2018/07/27 14:38:12
0 2018/07/30 14:11:12
Car engine
Car engine
0 2018/07/30 14:11:27
Airplane engine
Airplane engine
0 2018/07/30 14:14:37
Testing picture loader
Testing picture loader
0 2018/07/30 14:16:50
It was a cute little feller.
It was a cute little feller.
0 2018/07/31 16:38:27
The entire kit.
The entire kit.
0 2018/08/03 04:02:57
Part of 20 large 24"length pieces
Part of 20 large 24"length pieces
0 2018/08/03 04:04:38
My work for the next few days, I found one tick on my knee yesterday, he had not dug in yet, lucky for me.
My work for the next few days, I found one tick on my knee yesterday, he had not dug in yet, lucky for me.
0 2018/08/03 04:06:38
0 2018/08/06 03:18:25
Jim, would the 100-T fit in there? A mere fun suggestion.
Jim, would the 100-T fit in there? A mere fun suggestion.
0 2018/08/07 02:58:15
Like this.
Like this.
0 2018/08/07 03:37:33
90-T all done, as yet unrun since rebuuld.
90-T all done, as yet unrun since rebuuld.
0 2018/08/08 02:16:59
Lottsa stuff that goes round and round and up down, in this case back and forth.
Lottsa stuff that goes round and round and up down, in this case back and forth.
0 2018/08/08 02:19:05
This is a Saito 2.20 carb, your cats eye slot should be in this position.
This is a Saito 2.20 carb, your cats eye slot should be in this position.
0 2018/08/08 02:31:02
0 2018/08/08 17:10:12
0 2018/08/08 17:10:43
0 2018/08/08 17:11:04
0 2018/08/09 03:38:36
Another source
Another source
0 2018/08/09 04:27:07
0 2018/08/11 04:21:14
I received a nice catalog from New Zealand Aero Products, there are many plans in it including the Pawnee, I'll share gladly.
I received a nice catalog from New Zealand Aero Products, there are many plans in it including the Pawnee, I'll share gladly.
0 2018/08/11 17:54:14
0 2018/08/12 03:29:40
This 15 x 7 3 blade may be the best for the 125, it will be in stock soon. The 14 x 9 is in stock. The hole is on the CG.
This 15 x 7 3 blade may be the best for the 125, it will be in stock soon. The 14 x 9 is in stock. The hole is on the CG.
0 2018/08/13 08:25:04
2018 Chevy Cruze
2018 Chevy Cruze
0 2018/08/14 04:33:55
0 2018/08/18 03:06:49
0 2018/08/18 03:07:14
Of course with a matching cap, I never leave home without a cap.
Of course with a matching cap, I never leave home without a cap.
0 2018/08/20 03:35:21
0 2018/08/20 03:38:29
My choice would be an F 150 XLT with Eco Boost engine and 10 speed tranny, 3.55 rear gears and tow package.
My choice would be an F 150 XLT with Eco Boost engine and 10 speed tranny, 3.55 rear gears and tow package.
0 2018/08/20 03:40:38
Original .62 replaced with .62-b.
Original .62 replaced with .62-b.
0 2018/08/20 03:42:39
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.