RCU Forums
0 2021/02/01 15:22:42
Here is a different angle of the arms installed on a rear mounted carb. The holes in the arms are the same size as the brass arms in the carb so there is not need to drill.
Here is a different angle of the arms installed on a rear mounted carb. The holes in the arms are the same size as the brass arms in the carb so there is not need to drill.
0 2021/02/01 15:19:36
Here the arms are installed on a rear Carb arrangement and you can see the clearance between the two arms so they won't interfere with one-a-nother when in use.
Here the arms are installed on a rear Carb arrangement and you can see the clearance between the two arms so they won't interfere with one-a-nother when in use.
0 2021/02/01 15:17:58
Mark all your servo plugs to make it EZ to hook up at the field the first time. Made of Avery Lable material that sticks like mad! clean all the plug first.
Mark all your servo plugs to make it EZ to hook up at the field the first time. Made of Avery Lable material that sticks like mad! clean all the plug first.
0 2021/01/31 10:48:28
Here I am inserting the 90degree tips into the holes before disconnecting the plugs.
Here I am inserting the 90degree tips into the holes before disconnecting the plugs.
0 2021/01/28 16:57:48
0 2021/01/28 16:54:53
Just squeez the handles and they come apart EZ!
Just squeez the handles and they come apart EZ!
0 2021/01/28 16:53:05
Complete set of two decals for British markings comes with the spits!
Complete set of two decals for British markings comes with the spits!
0 2021/01/28 16:47:25
0 2021/01/28 16:46:27
Here is the retract feature on the original factory box.
Here is the retract feature on the original factory box.
0 2021/01/28 16:45:29
0 2021/01/28 16:42:33
EZ on but hard to get off once in place to make sure your plugs stay connected!
EZ on but hard to get off once in place to make sure your plugs stay connected!
0 2021/01/26 14:03:04
0 2021/01/26 14:01:17
Here is the throw gauge, Thermometer and " all aluminum custom JZ spinner. NIB, never used!
Here is the throw gauge, Thermometer and " all aluminum custom JZ spinner. NIB, never used!
0 2021/01/23 14:46:50
0 2021/01/22 11:11:57
0 2021/01/22 11:08:21
0 2021/01/22 11:06:39
Sulllivan tanks NIB w/hardware.
Sulllivan tanks NIB w/hardware.
0 2021/01/22 11:01:01
NIB spinners that you might need for your plane.
NIB spinners that you might need for your plane.
0 2021/01/22 11:00:16
0 2021/01/22 10:59:15
0 2021/01/18 17:16:36
2- NIB 3 blade 40-45 2 cycle Sport Scale blades from APC, never use of mounted $8.50 each + $3.00 S&H.
2- NIB 3 blade 40-45 2 cycle Sport Scale blades from APC, never use of mounted $8.50 each + $3.00 S&H.
0 2021/01/15 11:45:27
Pick the motor mount you need at a great price with $3.00 S&H for 2 mounts.
Pick the motor mount you need at a great price with $3.00 S&H for 2 mounts.
0 2021/01/15 11:39:41
These plastic models are ideal for getting the details right on you scale warbird. Complete and NIB with all their parts and a great price.
These plastic models are ideal for getting the details right on you scale warbird. Complete and NIB with all their parts and a great price.
0 2021/01/15 10:20:16
Zicky back 3/4" X 3- Velcro tape to use to secure receives, tanks and batteries. Great price and I will ship 3 package for the same S&H!
Zicky back 3/4" X 3- Velcro tape to use to secure receives, tanks and batteries. Great price and I will ship 3 package for the same S&H!
0 2021/01/15 10:12:54
Medium blue thread lock that is affordable and comes with a long clear application tube to watch the tread lock come down to protect from too much liquid. It comes with a air tight screw on cap too!
Medium blue thread lock that is affordable and comes with a long clear application tube to watch the tread lock come down to protect from too much liquid. It comes with a air tight screw on cap too!
0 2021/01/15 10:07:59
You can extend these 1 foot long fiberglass rods for as long as you need them. Brass fittings and connection hooks to pull servo wires in fuse or wings.
You can extend these 1 foot long fiberglass rods for as long as you need them. Brass fittings and connection hooks to pull servo wires in fuse or wings.
0 2021/01/15 10:03:41
Here are some long bits modelers can use for drilling holes for nyrod engine control for throttle and choke or servo wires in a wing. Ideal for hard to reach places where a hole is needed.
Here are some long bits modelers can use for drilling holes for nyrod engine control for throttle and choke or servo wires in a wing. Ideal for hard to reach places where a hole is needed.
0 2021/01/15 09:59:17
Now pull the handles together and the plug becomes disconnected with ease. Thanks for looking.
Now pull the handles together and the plug becomes disconnected with ease. Thanks for looking.
0 2021/01/15 08:53:34
Now that you have the holes in the male and female plugs,insert the 90 Degree tips of the pliers in the holes.
Now that you have the holes in the male and female plugs,insert the 90 Degree tips of the pliers in the holes.
0 2021/01/15 08:51:48
Start set up to use the "Pull-Apart-Pliers"by drilling two 1/16" hole 1/4" away from the tip of the plug and between the two connectors.
Start set up to use the "Pull-Apart-Pliers"by drilling two 1/16" hole 1/4" away from the tip of the plug and between the two connectors.
0 2021/01/15 08:49:39
Installed on a rear carb engine that you can use a clevis or ball into the aircraft aluminum arms that can be tapped to 4-40 threads.
Installed on a rear carb engine that you can use a clevis or ball into the aircraft aluminum arms that can be tapped to 4-40 threads.
0 2021/01/08 10:43:53
Here you can see the difference in height so the arms do not interfere with each other when hooked up to your servos. Choke makes a good Kill Switch too!
Here you can see the difference in height so the arms do not interfere with each other when hooked up to your servos. Choke makes a good Kill Switch too!
0 2021/01/08 10:42:26
Here are the arms for the Walbro Carb to slide on the brass shafts for throttle and chock. No need to try to make one from a nose gear steering arm.
Here are the arms for the Walbro Carb to slide on the brass shafts for throttle and chock. No need to try to make one from a nose gear steering arm.
0 2021/01/08 10:40:38
2 sets of British markings that stick on are included in this ARF!
2 sets of British markings that stick on are included in this ARF!
0 2021/01/07 08:42:12
The plane is set up for fixed or retracts that come in the kit.
The plane is set up for fixed or retracts that come in the kit.
0 2021/01/07 08:41:04
Here are the specks from the box!
Here are the specks from the box!
0 2021/01/07 08:40:29
Here are all the parts that come with the ARF Spits and 2 sets of wheels for the retracts or fixed gear.
Here are all the parts that come with the ARF Spits and 2 sets of wheels for the retracts or fixed gear.
0 2021/01/07 08:39:12
Original Global manufacture box with all the pats and accessories in place with original bags.
Original Global manufacture box with all the pats and accessories in place with original bags.
0 2021/01/07 08:37:43
0 2021/01/07 08:27:53
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.