RCU Forums
Don't like transfers as they never totally blend in.
Don't like transfers as they never totally blend in.
0 2020/12/10 09:45:46
Numbers are off a little but did they measure when doing the real thing.
Numbers are off a little but did they measure when doing the real thing.
0 2020/12/10 09:46:50
Should do some light deck tan or buff passes with the airbrush to tone down the bright numbers.
Should do some light deck tan or buff passes with the airbrush to tone down the bright numbers.
0 2020/12/10 09:48:20
Redone the number, my flat white Tamiya acrylic was lumpy its for the bin . White was flaky and some splatter but it looks worn so good.
Redone the number, my flat white Tamiya acrylic was lumpy its for the bin . White was flaky and some splatter but it looks worn so good.
0 2020/12/11 06:41:38
With the wash looks better , another few washes to do
With the wash looks better , another few washes to do
0 2020/12/11 06:41:47
Going for this colour on lower hull
Going for this colour on lower hull
0 2020/12/11 06:46:16
Faded yellow and try to do exhausts again like these
Faded yellow and try to do exhausts again like these
0 2020/12/11 06:46:53
Have a rubber wheeled lower in my stash, was going to use it for the Trumpeter 1/16 Panther.
Have a rubber wheeled lower in my stash, was going to use it for the Trumpeter 1/16 Panther.
0 2020/12/11 06:49:50
This looks like an interesting build , lots of curves and odd shapes ideal for a 3Dproject.
This looks like an interesting build , lots of curves and odd shapes ideal for a 3Dproject.
0 2020/12/13 06:56:16
This could be my next Flakpanzer turret.
This could be my next Flakpanzer turret.
0 2020/12/13 06:56:36
This would be a good 3D project as it has complex shapes. I should buy the 1/35 model to look at.
This would be a good 3D project as it has complex shapes. I should buy the 1/35 model to look at.
0 2020/12/13 07:07:04
Have this to do in the future , its getting a piece of kit sorted to make a very fast recoil action.
Have this to do in the future , its getting a piece of kit sorted to make a very fast recoil action.
0 2020/12/13 07:07:16
The Taigen front is wrong due to the gears not allowing the sprocket to be in correct position
The Taigen front is wrong due to the gears not allowing the sprocket to be in correct position
0 2020/12/13 07:23:41
Some surgery to the front to move sprockets forward and up. Fixed the front and rear torsion bars
Some surgery to the front to move sprockets forward and up. Fixed the front and rear torsion bars
0 2020/12/13 07:25:28
Cut out part of the lower hull and some thin styrene to cover up.
Cut out part of the lower hull and some thin styrene to cover up.
0 2020/12/13 07:28:06
Want the tracks looking like this.
Want the tracks looking like this.
0 2020/12/13 07:35:36
Want the tracks to look like this.
Want the tracks to look like this.
0 2020/12/13 07:39:40
This is annoying large gap between sprocket and 1st road wheel on the Taigen. We all know the HL/Taigens are toys but we all want the toy to look correct and run with no problems.
This is annoying large gap between sprocket and 1st road wheel on the Taigen. We all know the HL/Taigens are toys but we all want the toy to look correct and run with no problems.
0 2020/12/15 02:59:04
Rear plate , easy convoy light mod drill 4 holes
Rear plate , easy convoy light mod drill 4 holes
0 2020/12/15 03:09:54
Fit 4 short pieces of fibre optic cable
Fit 4 short pieces of fibre optic cable
0 2020/12/15 03:10:42
Removed the moulded on storage bins, the real ones were fitted onto brackets and sat out from the hull.
Removed the moulded on storage bins, the real ones were fitted onto brackets and sat out from the hull.
0 2020/12/15 03:14:59
0 2020/12/15 06:32:16
0 2020/12/15 06:32:30
Aluminium tray cut ,repositioned and screwed in
Aluminium tray cut ,repositioned and screwed in
0 2020/12/15 06:32:55
Will cut the plastic strip to suit new position.
Will cut the plastic strip to suit new position.
0 2020/12/15 06:33:48
This end needs a strip of styrene , as the idlers is adjustable this end is less noticeable
This end needs a strip of styrene , as the idlers is adjustable this end is less noticeable
0 2020/12/15 06:34:57
Now sprocket and road wheels look much better, if HL/Taigen cut a slot and designed the gearbox to fit properly like Tamiya none of this hassle would happen.
Now sprocket and road wheels look much better, if HL/Taigen cut a slot and designed the gearbox to fit properly like Tamiya none of this hassle would happen.
0 2020/12/15 06:36:57
0 2020/12/15 06:48:24
Tray cut ,moved forward and fixed in position.
Tray cut ,moved forward and fixed in position.
0 2020/12/15 06:48:36
Strip will be cut to line holes up
Strip will be cut to line holes up
0 2020/12/15 06:49:40
Now the tray is further forward need to fill this gap as the idlers can move this end will be less noticeable.
Now the tray is further forward need to fill this gap as the idlers can move this end will be less noticeable.
0 2020/12/15 06:50:42
Wheels in correct position now, can bolt/ glue strip on and fill any gaps.
Wheels in correct position now, can bolt/ glue strip on and fill any gaps.
0 2020/12/15 06:51:37
Tray fitted further forward
Tray fitted further forward
0 2020/12/15 07:03:20
Plastic strip off hull will be refitted to suit
Plastic strip off hull will be refitted to suit
0 2020/12/15 07:04:17
Rear gap will be filled with styrene or metal strip.
Rear gap will be filled with styrene or metal strip.
0 2020/12/15 07:07:39
Road wheels in new position no big gap now.
Road wheels in new position no big gap now.
0 2020/12/15 07:09:07
Putting lower hull together
Putting lower hull together
0 2020/12/16 10:00:57
The Taigen tanks always look nose heavy , should look like this.
The Taigen tanks always look nose heavy , should look like this.
0 2020/12/16 10:02:00
New board , like how easy they are to customise
New board , like how easy they are to customise
0 2020/12/16 10:03:38
0 2020/12/16 10:05:15
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.