RCU Forums
Hatch detail
Hatch detail
0 2021/11/16 11:45:50
0 2021/11/17 02:46:49
Made some stensils
Made some stensils
0 2021/11/17 10:05:37
The Tamiya recoil was a playing up, if you use a 3c lipo the motor overruns . With a 2c its OK, almost swapped it out for a servo , only found that out by accident when the board said low battery and changed settings for a 2c battery.
The Tamiya recoil was a playing up, if you use a 3c lipo the motor overruns . With a 2c its OK, almost swapped it out for a servo , only found that out by accident when the board said low battery and changed settings for a 2c battery.
0 2021/11/18 03:14:28
No space to route fibre down tubes and thro small drum.
No space to route fibre down tubes and thro small drum.
0 2021/11/19 03:00:23
worn and scratched paint , next will be some oil paint for grime.
worn and scratched paint , next will be some oil paint for grime.
0 2021/11/19 03:00:24
Not my best stencil work, quite hard to line up the stencils after the 1st colour.
Not my best stencil work, quite hard to line up the stencils after the 1st colour.
0 2021/11/19 03:00:28
Should have fitted ring underneath
Should have fitted ring underneath
0 2021/11/20 14:34:54
Fitted a continuous servo converted to a motor and a connection board.
Fitted a continuous servo converted to a motor and a connection board.
0 2021/11/20 14:35:54
0 2021/11/29 03:01:15
0 2021/11/29 03:01:20
0 2021/11/29 03:01:24
0 2021/11/29 03:01:28
3rd one is almost correct let’s hope the rest are as good
3rd one is almost correct let’s hope the rest are as good
0 2021/11/30 02:15:34
0 2021/12/02 01:25:54
New Elmod board fits
New Elmod board fits
0 2021/12/02 11:55:48
0 2021/12/04 03:13:34
0 2021/12/04 10:54:54
switches on top RHS of Spektrum
switches on top RHS of Spektrum
0 2021/12/07 02:26:40
0 2021/12/13 13:09:09
0 2021/12/13 13:10:14
0 2021/12/13 13:10:40
New bump stops
New bump stops
0 2021/12/14 09:31:50
Lifting hooks cut out from brass strip
Lifting hooks cut out from brass strip
0 2021/12/14 09:32:09
Plate can swing over to open position
Plate can swing over to open position
0 2021/12/14 09:32:15
Improved covers.
Improved covers.
0 2021/12/16 10:22:14
0 2021/12/18 01:12:13
0 2021/12/19 02:30:56
0 2021/12/21 02:38:35
75mm trumpeter 1/16 shell and a pieces of Al tube, will do again in brass as it’s thinner
75mm trumpeter 1/16 shell and a pieces of Al tube, will do again in brass as it’s thinner
0 2021/12/23 02:57:41
No use having a working hatch without a spent shell
No use having a working hatch without a spent shell
0 2021/12/23 02:59:45
Armoured cover for command aerial on Trumpeter Panther
Armoured cover for command aerial on Trumpeter Panther
0 2021/12/23 03:00:47
Armoured cover
Armoured cover
0 2021/12/27 08:39:47
Socket tube
Socket tube
0 2021/12/27 08:40:44
Support for aerial
Support for aerial
0 2021/12/27 08:42:03
Base for aerial
Base for aerial
0 2021/12/27 08:43:01
Mould and insulator with brass tube
Mould and insulator with brass tube
0 2021/12/27 08:43:45
Made command aerial
Made command aerial
0 2021/12/27 08:45:19
Both aerials
Both aerials
0 2021/12/27 08:46:01
0 2022/01/07 01:57:05
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.